Winchester Repeating Arms 9410 Cross Bolt Safety (Historic Manual) - Manual (Page 34)

34
This is a specialized, finely fitted mechanism. You may
permanently mar it by attempting to disassemble the
inner mechanism assemblies. If further disassembly for
service or cleaning is required, take your gun to a U. S.
Repeating Arms Company Authorized Repair Center or a
competent gunsmith as explained under “Service or Repair.”
P ARTS , S ERVICE , R EPAIR AND Q UESTIONS
If your Winchester rifle or shotgun should ever need
service or repair; it is often best to utilize one of our
Authorized Service Centers. In some cases it is appropriate
to use the Winchester Service Center in Arnold,
Missouri. A list of Authorized Service Centers was
included with your new firearm. If you need a new listing
call us. We can help you determine the best place to
service your firearm.
In order to avoid delays it is important to never send your
gun directly to our facility without direct authorization
from one of our service specialists. This avoids possible
delays in obtaining service. Call us for details on how to
receive service first, before sending your gun.
Parts listings, Service Center lists, service procedures and
general product information are also found on the web at:
www.Winchester-guns.com
G ENERAL P RODUCT
AND H ISTORICAL Q UESTIONS
1-800-945-5237
Winchester Rifles and Shotguns Customer Service
275 Winchester Ave.
Morgan, Utah 94050-9333
P ARTS , S ERVICE , R EPAIR S TATUS
AND T ECHNICAL Q UESTIONS
1-800-322-4626
Winchester Rifles and Shotguns Parts & Service
3005 Arnold Tenbrook Road
Arnold, MO 83010-9406
CAUTION: PARTS ARE MADE FOR
CURRENT WINCHESTER BRAND GUNS
AND SHOULD NOT BE USED IN OTHER
GUNS EVEN THOUGH MODELS MAY BE
SIMILAR. IMPROPERLY FITTED PARTS
MAY BE DANGEROUS.
02-018_9410_Ownersmanual 8/14/02 11:23 AM Page 34