Connecting the mur2em – ClearOne MUR2EM Installation Guide User Manual
Page 18
Musica MUR2EM
3-6
NS-1005-7140
All specifications subject to change without notification. All rights reserved. Copyright © 2005 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 78727 /
www.netstreams.com.
Figure 3-6
Configuration complete
The unit reboots. You will see the new IP, Subnet Mask, and Gateway settings on
the HyperLink terminal screen.
15.
Repeat steps 1. through 14. for each MUR2EM.
IMPORTANT!
Do not make any changes to your computer, or any hardware connected to
the system until the unit completely reboots.
Connecting the MUR2EM
To connect additional MUR2EMs to your home network, complete the following steps:
1.
Connect each MUR2EM to the Musica MU5066ADC using a null modem cable.
2.
Connect the Ethernet port of each MUR2EM to the network hub/switch.
3.
Connect the Ethernet port of the computer to the network hub/switch.
4.
Ensure all power cables are plugged in.
5.
Start the computer.