ClearOne CHAT 50 Manual - Manual (Page 11)

8 Technical Support: 800.283.5936
CHAPTER 3: CONFIGURING THE CHAT 50
CONFIGURING YOUR CHAT 50
this section describes how you configure your CHAt 50 for the specific devices you are connecting to. the CHAt
software contains a database of pre-configured device settings that allows you to instantly select and apply optimal
settings for supported devices.
> Note: from time to time, ClearOne adds additional devices to the database. to update your CHAt
software to include all currently supported devices, see the Update Firmware & Database section
later in this chapter.
If the specific device you are using with the CHAt 50 is not listed in the database, you can create a custom device by
following the instructions described later in this chapter.
to configure the CHAt 50 for your devices, perform the following steps:
Using the included USb cable, connect the CHAt 50 to your PC or laptop. the blue LEd indicators on the CHAt 50 1.
illuminate, indicating that the CHAt 50 is powered and ready for use.
Start the CHAt software by double-clicking the
2. ClearOne CHAT icon on your desktop, or by launching the
application from your PC’s Start menu.
the main screen of the CHAt software will be displayed. Click Device Setup button located along the left side of the
window. the device Setup screen appears displaying the general types of devices you can configure for use with the
CHAt 50.