Heck, Irmware, Pdates – ClearOne CHAT 50 Manual User Manual
Page 15
12 Technical Support: 800.283.5936
Check for Firmware Updates
Perform the following steps to automatically update your firmware and device database:
Click the
1.
Check for updates button to check the web for available updates.
the following series of messages appears below the progress bar:
2.
“Locating website...”
•
“website found”
•
“Click Update to load new firmware into device” (Appears only if a new firmware file is available.)
•
“Click Update to load new database information” (Appears only if a new device database file is available.)
•
> Note: If no new firmware or device database updates are available, then the following messages appear
below the progress bar:
• “Your device contains the most recent firmware”
• “Your database contains the most recent updates”
this indicates that your firmware and database are current. No updates are required.
3. Click the Update button to install available updates. the Update dialog box appears.
4. Click Update Firmware to update firmware only.
Click Update Database to update the device database only.
Click Cancel to cancel the update procedure and return to the Update Firmware screen.
5. If you choose to update the device database, a warning dialog appears.
6. Click Yes to proceed with the firmware or device database update.
7. A second warning dialog appears. Click Yes to proceed.
8. A series of messages appears below the progress bar indicating that the updates are in progress.
> Note: windows vista will prompt you to unplug and then reconnect the CHAt 50 to complete the
firmware update.
9. when the update is complete, a message appears below the progress bar depending on the upgrade:
“Update Successful! The firmware for CHAT has been changed to <
•
new revision level>”
where <
new revision level> is the new firmware revision number.
“Update Successful! The database has been updated to <
•
new revision level>”
where <
new revision level> is the new database version number.
the most recent firmware and device database updates are now loaded.