ClearOne CHAT 50 Manual - Manual (Page 7)

4 Technical Support: 800.283.5936
CHAPTER 2: GETTING STARTED
CHAT 50 CONTROLS
Power LED Indicator
the LEd status indicator lights blue when the CHAt 50 is connected to a PC or Mac via USb, or when the CHAt 50 is
plugged into AC power. the LEd status indicator changes to red when mute is on.
Volume and Mute Buttons
Use the Volume Up/Down buttons to adjust the volume level of the CHAt 50. Use the Mute button to mute the CHAt
50’s microphone until the button is pressed again.
If you are using the CHAt 50 with a PC, you can also use the CHAt application or the volume controls in windows to
make these adjustments.
> Note: If your CHAt 50 is connected to a PC, any changes you make to volume by pressing the CHAt
50 buttons also change the volume settings in windows.
MUTE STATUS INDICATOR
VOLUME UP
VOLUME DOWN
MUTE