Great Plains NTA3010 Operator Manual - Manual (Page 18)

16
Section 2 Operating Instructions
NTA3010 and NTA3510 Air Drill Implement SN Z1370- 160-219M 8/14/
Great Plains Mfg., Inc.
9. Insert wing fold pins to secure folded wings as shown
in Figure 2-6.
Figure 2-6
Folded Wings Secured
10. Do not remove transport locks from folded implement.
Folding Without Markers
If your implement is not outfitted with marker attachments,
you can reduce the height of the folded implement to ease
transport.
1. Remove marker-stop bolt and spacer from the wing
braces. Figure 2-7 shows the wing braces without the
marker stop.
Figure 2-7
Folded Wings Without Marker Stop
16166
IMPORTANT: Marker attachments will increase the
folded height of the implement. Be aware of the addi-
tional clearance needed for folding and transporting.
Refer to “Specifications and Capacities,” page 32.
16168
2. Remove the stop collars shown in Figure 2-8 from the
hydraulic fold cylinders.
Figure 2-8
Stop Collar on Fold Cylinders
3. Follow steps under Folding the Implement, page 15.
When first folding after removing marker stops, care-
fully watch towers and hoses to be certain they are not
damaged by folding wings.
16213