Great Plains NTA3010 Operator Manual - Manual (Page 32)

30
Section 5 Maintenance and Lubrication
NTA3010 and NTA3510 Air Drill Implement SN Z1370- 160-219M 8/14/
Great Plains Mfg., Inc.
Rear Castor Parallel Arm Pivots
Zerks are on both ends of the upper and lower arms–four
zerks total on each rear wheel arm.
Type of Lubrication: Grease
Quantity = Until grease is visible at ends of pivots.
30
Vertical Spindles
Type of Lubrication: Grease
Quantity = Until resistance is felt.
10
Wheel or Axle Bearings
Type of Lubrication: Grease
Quantity = Pack full
Annually
10
Wing Gauge-Wheel Pivots
Type of Lubrication: Grease
Quantity = Until grease is visible at ends of pivot.
16218
16170
16249
16247