Great Plains NTA3010 Operator Manual - Manual (Page 6)

4
Important Safety Information
NTA3010 and NTA3510 Air Drill Implement SN Z1370- 160-219M 8/14/
Great Plains Mfg., Inc.
Safety Labels
Your implement comes equipped with all safety labels in place.
They were designed to help you safely operate your implement.
1. Read and follow label directions.
2. Keep all safety labels clean and legible.
3. Replace all damaged or missing labels. Order new labels
from your Great Plains dealer. Refer to this section for
proper label placement.
4. When ordering new parts or components, request corre-
sponding safety labels as well.
5. To install new labels:
a. Clean the area the label is to be placed.
b. Peel backing from label. Press firmly on surface
being careful not to cause air bubbles under label.
818-003C
Slow Moving Vehicle Label
838-265C
Amber Reflectors
(Both Rear Wheels)
16174
16186
16185
838-265C
Amber Reflectors
(Both Ends, Center Section)