Leveling marker disk transport carrier – Great Plains 2515P Operator Manual User Manual

Page 42

Advertising
background image

2015P and 2515P

173-208M

4/11/2005

40

Leveling marker disk

Refer to Figure 50

If the marker disk is not square with the ground
when the marker is lowered in the field, or if the
marker arm tends to fold up while lowered in the
field, adjust the marker mount.

To adjust, loosen 1/2-inch bolts (1) and rotate
marker mount (2) until marker disk is square with
the ground (3).

Transport Carrier

Refer to Figure 51

When marker is folded, the second section should
rest in transport-carrier saddle.

To adjust front-to-rear position of saddle, loosen
1/2-by-6-inch u-bolts (1) that fasten transport-car-
rier mount onto box frame. Slide transport-carrier
assembly forward or back as needed.

To adjust height of saddle, loosen 1/2-by-2-inch u-
bolts (2) that hold carrier tube to mounting brack-
et. Slide carrier tube up or down as needed.

Figure 50

Squaring Disk Marker

17635

15632

Figure 51

Adjusting Marker Carrier

Advertising
This manual is related to the following products: