Great Plains 2515P Operator Manual - Manual (Page 44)

2015P and 2515P
173-208M 4/11/2005
42
Marker Width
Refer to Figure 53
To adjust marker width, loosen jam nuts (1) and
1/2-inch set screws (2). Move marker disk tube (3)
in or out to get the proper dimension.
Refer to Figure 54
The diagram below shows marker widths for 15-
inch spacing with all meters open.
To measure for marker width adjustment:
1. Lower bean machine in the field and drive for-
ward a few feet.
2. Measure from the middle of the outside row to
the mark in the ground made by the marker
disk.
NOTE: If planting 30 inch row spacing by shutting
off meters, markers may need to be readjusted.
Refer to page 43 for more information.
Figure 53
Marker Width
18304
18530
Figure 54
Marker Width
2015P
2515P