Amico Dome Loaded Manifold Nema-4 NFPA - Manual (Page 4)

4 Amico Pipeline
User Responsibility
The information contained in this Installation and Maintenance Manual, pertains only to the Amico Automatic Gas
Manifold. This product will perform in conformity with the descriptions contained in this manual when assembled,
operated, maintained and serviced in accordance with the installation instructions provided.
The manifold MUST be checked periodically. Parts that are broken, missing, worn, distorted or contaminated, must
be replaced immediately. Should such repair or replacement become necessary, please contact Amico Corporation or
their distributors.
For installing CO2 and N2O manifolds outdoors, please refer to NFPA 99C “Central supply systems for nitrous oxide and
carbon dioxide shall be prevented from reaching temperatures lower than the recommendations of the central supply
system’s manufacturer, but shall never be lower than -7°C (20°F) or greater than 54°C (130°F).”
All Manifolds should not be repaired or altered without prior written approval by Amico Corporation or it’s dis-
tributors. Failure to comply will void all warranty on the manifold.
Statements in this manual preceded by the words WARNING, CAUTION, DANGER and NOTE are of special signifi cance.
Please read these sections carefully.
WARNING: denotes steps which can prevent injury.
CAUTION: denotes steps which can prevent damage
to equipment.
DANGER: denotes steps which can prevent electrical
shock to equipment or to prevent serious
injury and/or death.