Apricorn EZ Gig IV Cloning Software with Data Select for Windows - Manual (Page 5)

5
www.apricorn.com
System Requirements
Hardware: 1 GHz Intel ® Pentium ® or Atom ™ processor
or equivalent
256MB RAM
Available USB port
CD ROM or CD-RW drive
Keyboard: standard, PS/2 or USB
Mouse: serial, PS/2 or USB (optionally, can be
operated with keyboard only)
Operating systems:
Microsoft: Windows ® 7, XP or Vista ™
NOTE: When used with Windows 2000 you must boot
to the EZ Gig III CD to clone your drive
Supported Media: IDE/ATA hard disks, CompactFlash via IDE
SATA hard disks (internal & external)
SCSI hard disks (internal & external)
USB hard disks (internal & external)
Hub Devices - USB devices may also be connected
via a USB Hub, however for achieving the highest
possible data transfer rate it is recommended that
you connect them directly to your computer
Supported controllers:
PCI IDE controller
Bus master IDE controller
SATA controller with IDE interface
SATA-II controller with AHCI interface
USB UHCI & OHCI controller (USB 1.1)
USB EHCI controller (USB 2.0)
USB 3.0 x HCI (USB 3.0)