B&G Zeus 12 - Manual (Page 46)

Commission the System | 45
Damping
Controls how quickly instruments respond to changes in values from sensors.
Damping can be used for heading, wind, boat speed and depth instruments.
Increasing the damping applies more averaging or smoothing of the data update rate
on the instrument or display. Damping settings are applied to SimNet displays and
Instruments belonging to particular damping SimNet Groups.
Note: Default damping is set to zero. Data received from H3000 is already damped!
Device List
Using the Device List Function you can:
list all of the active SimNet and NMEA2000 devices on the network, showing model
•
description and serial number. Devices can be sorted by model ID or by serial number
display information relating to a device such as, name, manufacturer, software
•
version, instance, status
give the device a logical name relevant to the user
•
see data coming from the device
•
Some devices can be confi gured
further
Device data can be viewed
Enter a logical
name for the
device such as
a location to
differentiate
same devices
e.g. ZG50
Starboard