B&G Network Quad - Manual

CONTENTS
DEEP ALARM GENERAL INTRODUCTION TO B&G NETWORK......... 2
ENABLING/DISABLING THE DEEP ALARM..................22 INTRODUCTION TO NETWORK QUAD......................... 3
ADJUSTING THE DEEP ALARM VALUE.......................22 EXAMPLE SYSTEMS USING NETWORK QUAD........... 4
ANCHOR ALARM
SELECTING THE DISPLAY MODE ................................ 5
USING THE ANCHOR ALARM.......................................23
ENABLING/DISABLING THE ANCHOR ALARM............24
USING THE SPEED KEY ................................................ 6
ADJUSTING THE ANCHOR ALARM SHALLOW LIMIT .25
CALIBRATION AND OPERATING PARAMETERS........ 7
ADJUSTING THE ANCHOR ALARM DEEP LIMIT .........25
SETTING THE DISPLAY DAMPING ............................... 8
SETTING THE SPEED AND LOG UNITS ....................... 9
USING THE TIMER/TEMP KEY .....................................26
SPEED AND LOG CALIBRATION ................................ 10
RESETTING THE TRIP LOG..........................................27
1 - MANUAL CALIBRATION - CAL ................................ 11
SETTING THE TIMERS AND LAP TIMER .....................28
2 - MANUAL CALIBRATION - LOG CAL........................ 12
SETTING THE TEMPERATURE UNITS.........................29
3 - AUTOMATIC CALIBRATION - AUTO CAL ............... 13
CALIBRATING THE TEMPERATURE SENSOR ............30
RESETTING THE DEAD RECKONED DISTANCE ....... 15
USING THE LIGHTS KEY ..............................................31
USING THE DEPTH KEY .............................................. 16
NETWORK ALARMS .....................................................32
THE DEPTH DATUM - CAL ........................................... 17
FAULT AND ERROR MESSAGES .................................33
SETTING THE DEPTH DATUM..................................... 18
SETTING THE DEPTH UNITS....................................... 19
INSTALLATION..............................................................34
SITING THE UNIT...........................................................34
DEPTH ALARMS........................................................... 20
MOUNTING THE UNIT ...................................................34
SHALLOW ALARM
ENABLING/DISABLING THE SHALLOW ALARM ......... 21
SPECIFICATION ............................................................36
ADJUSTING THE SHALLOW ALARM VALUE .............. 21
610-HB-0503-05 1