B&G Network Quad - Manual (Page 28)

SETTING THE TIMERS AND LAP TIMER
The Lap Timer can be used to `freeze' the displayed time
w th any of the three Timers.
Press the TIMER
key to display the
timers. Press SETUP key
1 10
min.
2 5 min.
3 Count-up
The display will
flash.
Press ENTER
key, the display is
set to the
selected starting
value. The timer
starts to count. Press TIMER key,
the display stops
flashing and the
timer is running. Press TIMER key
to freeze the
displayed time.
The timer is still
counting but not
displayed Press TIMER key
4 times to display
the timer again.
i
610-HB-0503-05 28