Baseline Systems BaseStation 3200 - Manual (Page 5)

Baseline Wi-Fi Module Configuration Guide
3
2. In the items list, select Internet Protocol (TCP/IP) or Internet Protocol (IPv4), and then click
Properties.
3. Select Use the following IP address.
4. In the IP Address field, type 192.168.1.10
5. In the Subnet mask field, type 255.255.255.0
6. Click OK, and then click Close on the Local Area Connection properties dialog box.
Note: After you have finished configuring the Wi-Fi module, you will need to repeat these steps to
return the setting to Obtain an IP address automatically.