Baseline Systems BaseStation 3200 - Manual (Page 7)

Baseline Wi-Fi Module Configuration Guide
5
Step 3 – Configure the Wi-Fi Module
1. Make sure the BaseStation 3200 controller is powered on in order to provide power to the
Wi-Fi module.
2. Disconnect the Ethernet cable from the Ethernet port on the BaseStation 3200 controller.
3. Connect the cable to your computer’s Ethernet port.
4. Open a web browser (Internet Explorer, Mozilla Firefox, Safari, etc.).
5. Type 192.168.1.20 into the address bar, and then press Enter.
6. On the airOS Login page, type ubnt in both the Username and Password fields.
7. In the Country field, click the drop-down arrow and select the country where you are located.
8. Change the default language in the Language field if necessary.
9. Review the Terms of Use, and then click the checkbox to agree to the terms.
10. Click the Login button. The main configuration page of the Bullet M 2 airOS application
displays.
11. Click the Wireless tab.