Bio-Rad Image Lab™ Software - Manual (Page 38)

2 | Setting Up the Instrument with Image Lab Software
38 | GS-900 Calibrated Densitometer with Image Lab Software
To enable secure mode
1. From the Security menu, click Security Preferences to display the Security
Preferences dialog box.
2. Select Enable secure mode.
3. Click OK to display the Enable Secure Mode authentication dialog box.
4. Enter your Image Lab Administrator user name and password.
5. If you are set up on a Windows network server, type the name of the Windows
domain in the Domain field.
Note: The default is the domain on which the current Windows user is
located, and this name will appear in the field
6. Click OK to save your changes.