Bio-Rad Image Lab™ Software User Manual
Page 118
Advertising
6 | Analyzing Images
118 | GS-900 Calibrated Densitometer with Image Lab Software
Delete — deletes a band from a lane. Use this feature to remove bands
that are not relevant to your analysis. Click Delete, and then click on the
band you want to remove.
Adjust — adjusts the height of a band. Click Adjust. Boundary lines appear
on either side of each band. Move the cursor over a boundary line until you
see a double-headed arrow. Move the boundary line up or down. The
center is recalculated and the band appears there.
Note: You can also adjust band boundaries in the Lane Profile view.
Advertising
This manual is related to the following products: