BlueAnt Supertooth 3 Handsfree - Manual (Page 10)

10
Alternatively, assuming that Voice Answer is activated:
(see Voice Answer Activation/Deactivation in Section K)
After a beep is heard on the kit, accept a call by loudly and
clearly saying “ACCEPT CALL”, “ACCEPT”, “ANSWER”
or “OK”; say it only once and within 3 seconds of the beep
emphasizing each syllable. When the call is answered,
the Bluetooth Indicator (3) will turn steady blue.
End a Call:
Press End/Reject Button (2) for 1 second to end the call.
“End of call” will be announced.
Voice Dial: (Your phones Voice Dial feature)
Important: Before using this feature, make sure that the
voice dialing function of your phone is activated and at
least one voice tag is recorded on your phone. (Kindly
refer to the procedure in your phone’s manual.)
Note: Voice dialing entries must be stored in the phone’s
memory, not on the SIM card!
1. Press the MFB (1) for 1 second.
2. A beep will be heard through the SUPERTOOTH 3
prompting you to say the voice tag associated with the
contact you wish to call. The Bluetooth Indicator (3)
will turn to a steady blue.
3. Say the voice tag exactly as how you recorded it.
4. The voice tag will be played back to you to ensure you
are calling the correct contact, the phone will then dial
the number automatically.
Redial (For Handsfree Profi le Phones only):
Press the MFB (1) for 3 seconds. The SUPERTOOTH 3
will then proceed to call the last dialed number. ”Redialing”
will also be announced on the SUPERTOOTH 3.
Reject a Call (For Handsfree Profi le Phones only):
During an incoming call, press End/Reject Button (2) for
1 second. The incoming call will be rejected and “Call
rejected” will be announced on the kit.