BlueAnt Supertooth 3 Handsfree - Manual (Page 17)

17
EN
5. Can I transfer an active call back to my phone to
continue it there?
Yes. Simply press and hold the MFB for 3 seconds and the
call will be transferred back to the phone.
6. How many devices can I pair to the Supertooth 3?
The Supertooth 3 can store pairing information for up to
8 different devices. However, the Supertooth 3 can only
connect to one phone at a time.
7. Is my phone compatible?
If your phone has Bluetooth, it more than likely supports a
Handsfree or Headset Bluetooth profile, so will work with
the Supertooth 3. Check your phones manual to see if it
supports Bluetooth Headset or Handsfree profile.
8. What is the passcode/passkey for the Supertooth 3?
The Passcode for the Supertooth 3 is “0000”.
9. Can I change the passcode of the Supertooth 3?
No. The passkey is inbuilt and cannot be changed.
10. Can I use voice activated dialling?
Yes. The Supertooth 3 supports voice activated dialling if
your phone also supports this feature. Check your phones
user manual for information on setting up this feature and
how to record voice commands.
11. Can I use the Supertooth 3 to listen to music on my
mobile?
Mobiles that use the Handsfree profile are able to send
music to the Supertooth 3, but it will be a mono signal and
sound similar to an AM radio.
12. How often should I charge my Supertooth 3?
You should only charge the Supertooth 3 when the LED
Indicator changes to red and announces “Low Battery”.
The battery will last for about 800 hrs on standby and much
longer if the Supertooth 3 is switched off in between uses.