Yealink SIP-T38G - Manual (Page 35)

Customizing Your Phone
25
The time and date display on the LCD screen when the phone is idle. If the phone
cannot obtain the time and date from the Simple Network Time Protocol (SNTP) server,
contact your system administrator for more information. You can configure the phone to
obtain the time and date from the SNTP server automatically, or configure the time and
date manually.
To configure the SNTP settings via phone user interface:
1. Press Menu->Setting->Basic Settings->Time & Date->SNTP Settings.
2. Press or , or the Switch soft key to select the time zone that applies to your
area from the Time Zone field. The default time zone is "+8 China(Beijing)".
3. Enter the domain names or IP addresses in the NTP Server1 and NTP Server2 fields,
respectively.
4. Press or, or the Switch soft key to select Automatic from the Daylight
Saving field.
5. Press the Save soft key to accept the change or the Back soft key to cancel.
Note
To configure the time and date manually via phone user interface:
1. Press Menu->Setting->Basic Settings->Time & Date->Manual Setting.
Please refer to Appendix A - Time Zones for the list of available time zones on the IP
phone.