Yealink SIP-T38G - Manual (Page 94)

User Guide for the SIP-T38G IP Phone
84
You can configure the phone to pick up an incoming call by using the DPickup/GPickup
soft key. You can also configure the call pickup code on a global or per-line basis via
web user interface.
Note
Direct Call Pickup
To enable the direct call pickup via web user interface:
1. Click on Phone->Features.
2. Click the “+” sign on the left of the Call Pickup to expand the feature list.
3. Select Enabled from the pull-down list of Direct Call Pickup.
4. Enter the direct call pickup code in the Direct Call Pickup Code field.
5. Click Confirm to accept the change.
Note
To configure the direct call pickup code on a per-line basis via web user interface:
1. Click on Account.
2. Select the desired account from the pull-down list of Account.
3. Click on Advanced.
If there are many incoming calls at the same time, pressing the Gpickup soft key on the
phone will pick up the call that rings first.
The direct pickup code above is configured on a global, which applies to all accounts.