Yealink SIP-T42G - Manual (Page 50)

User Guide for the SIP-T42G IP Phone
40
4. Press or , or the Switch soft key to select the desired account from the
Account field.
If Auto is selected, the phone will use the first available account when placing calls
to the contact from the blacklist directory.
5. Press the Add soft key to accept the change or the Back soft key to cancel.
To add a contact to the blacklist directory from the local directory:
1. Press Directory soft key.
The IP phone enters the local directory directly as there is only Local Directory in the
directory by default.
If Local Directory is removed from the directory, press Menu->Directory->Local
Directory to enter the local directory.
2. Select the desired contact group and press the Enter soft key.
3. Press or to highlight the desired contact.
4. Press the Option soft key and then select Add to Blacklist from the prompt list.
The LCD screen prompts "Move selected to blacklist?".
5. Press the OK soft key to confirm the setting.
For operating instructions on editing, deleting, placing calls to and/or searching for
contacts in the blacklist, refer to the operating instructions of
Local Directory on page 30 .
You can add local contacts, search for a contact, or simply dial a contact number from
the corporate directory.
You can configure your new phone to access up to 5 corporate directories. The phone
supports up to 5000 corporate directory entries. For the access URL of the corporate
directory, contact your system administrator.
To configure an access URL for remote phone book via web user interface:
1. Click on Directory->Remote Phone Book.
2. Enter the access URL in the Remote URL field.