Yealink SIP-T42G - Manual (Page 52)

User Guide for the SIP-T42G IP Phone
42
4. Enter a few continuous characters of the contact name or continuous numbers of the
contact number using the keypad.
The contacts whose name or phone number matches the characters entered will
appear on the LCD screen. You can place a call from the result list.
To place a call from the corporate directory:
1. Press Menu->Directory->Remote Phone Book.
If Remote Phone Book is added to the directory, press Directory->Remote Phone
Book to enter remote phone book.
2. Select the desired remote group, and then press the Enter soft key to load the
corporate directory.
3. Select the desired contact in the corporate directory.
4. Press the Dial soft key.
In addition, you can enable the phone to present the caller identity stored in the
corporate directory when receiving a call.
To enable the presentation of caller identity stored in remote phone book via web user
interface:
1. Click on Directory->Remote Phone Book.
2. Select Enabled from the pull-down list of Search Remote Phonebook Name.
3. Enter the refresh period in the Search Flash Time (Seconds) field.
The default value is 21600 seconds.
4. Click Confirm to accept the change.