Hotline – Yealink SIP-T42G User Manual

Page 76

Advertising
background image

User Guide for the SIP-T42G IP Phone

66

3. Enter the desired delay time in the Inter Digit Time (1~14s) field.

The default delay time is 4s.

4. Click Confirm to accept the change.

Note

You can dial a hotline number immediately upon lifting the handset, pressing the
speakerphone key or the line key. You can also configure a delay, where the phone will
dial out the hotline number automatically after the specified period of time.

To configure the hotline number via phone user interface:

1. Press Menu->Features->Hot Line.

2. Enter the desired number in the Number field.

3. Enter the delay time (in seconds) in the Hotline Delay field.

The valid values range from 0 to10.

4. Press the Save soft key to accept the change or the Back soft key to cancel.

Hotline is configurable via web user interface at the path Features->General
Information.

Live dialpad is configurable via web user interface only.

Advertising