Colorlight CL20 - Manual (Page 20)

Page 20 INSTALLATION MANUAL CL20
ELECTRICAL SYSTEM 8.
IMPORTANT!
The electric supply to the e-box must be disconnected before beginning any work inside
the box; it’s not enough to turn off the internal main switch.
8.1 Electrical-box (115/230VAC)
The e-box is designed to be as compact as possible but still allow service personnel to easily
replace any broken component.
The design consists of a sandwich construction where the upper section plate is the searchlight
connection part and the bottom section plate is the electronic lamp driver part.
By removing the entire assembly plate from the cabinet, you can lift and slide out the bottom
section plate and if needed replace individual driver or replace the entire plate.
The cabinet is fan cooled and the fan starts only when the lights are on.