Colorlight CL25 Installation manual - Manual (Page 15)

INSTALLATION MANUAL CL25, CL35 Page 15
CLI-30005, REPLACING THE BULB 7.
Service instruction no: CLI-30005
Revision date:
2013-09-09
Applicable models: CL25-**, CL35-**
Spareparts needed (refer to CL spareparts list)
CL25-**
1 CLN0166 (HMI / UV bulb 400W) × 1
2 CLS-25330 Front glass sealing × 1
CL35-**
1 CLN0094 (HMI / UV bulb 575W) × 1
2 CLS-35318 Front glass sealing × 1
Tools and supplies required:
1 8mm Ratchet Wrench × 1
2 Suction cup tool × 1
3 Lint-free cloth
4 Isopropyl (rubbing) alcohol
Important information
This instruction shows how to replace the bulb and front glass sealing on the CL25 model
equipped with white or UV light but the procedure is the same for the CL35.
It’s recommended to replace the front glass sealing when replacing the bulb, reflector or front
glass to reduce the risk of water ingress between front glass and lamp housing.
Regarding safe handling of bulbs please read:
Warnings and Information, page 5
1. Turn off system power before servicing.
2. Start by removing all the four glass holder brackets that keeps the glass in place. Use a
ratchet wrench size 8mm.