Colorlight CL25 Installation manual - Manual (Page 30)

Page 30 INSTALLATION MANUAL CL25, CL35
ACTIONS AFTER INSTALLATION OR POWER FAILURE 11.
At system startup, the panels will start to scan the network to find connected electrical boxes,
during this time, the panel software version will be displayed.
If not the panel made contact by displaying home screen within 30 seconds, it may be due to
the following:

Electrical box is not turned on, applies only if the panel has a separate power supply.

There are problems in the network cabling between the electrical box and the operator
panel.
At the first boot after installation or power failure, the searchlight must be synchronized with the
control system.
After installation or power failure of the electric box you can still use the searchlights main
functions like joystick control, light on/off and focus but in order to be able to use positioning
functions such as display indicator*, parking position, sweep*, fixed positions* or surveillance*,
the searchlight must be synchronized with the control system.
The easiest way to synchronize the system after reboot is to enter the quick start menu and
select the “Park” function. Now the searchlight will synchronize and then park if a parking
position has been set.
If necessary the origin can be set after the steps above to give an accurate readout of the
indicator*. To set the origin, please see User´s Manual, section
11.8.6.1 Store origin.
*Standard function for CL25/CL35, from 2014- also standard for CL20