Concord Camera Concord Eye-Q Eye-Q 3042AF - Manual (Page 6)

4
GETTING STARTED
INTERNAL MEMORY/INSERTING THE MEMORY CARD
The camera has 7MB internal memory that can be used right away. The camera can also use secure digital
(SD) memory cards (not included) to store images and video clips.
1. Open the Battery/Memory Card door.
• Slide the door in the direction of the arrow marked on it, and lift it open. (fig.1.1)
2. Insert the memory card as indicated by the diagram. (fig.1.2)
• Please insert the card in straight, not on an angle.
3. Shut the Battery/Memory Card door by sliding it in the opposite direction of the arrow marked on it, and
close it securely. (fig.1.3)
• To eject the card, push the card in and release, then pull it out.
TAKING A PICTURE
TAKING A PICTURE WITH THE VIEWFINDER OR LCD
1. Turn the camera on.
2. Set the camera to ( ) Camera Mode and make sure the Macro Mode Switch is set to the ( ) Distant
Mode located on the front of the camera. (fig.1.1)
3. Frame the subject in the viewfinder or LCD.
4. Press the shutter button half-way to activate the auto-focus until the green AF LED lights up. (fig.1.2)
5. Press the shutter button fully to capture the image. (fig.1.3)
fig.1.1 fig.1.2 fig.1.3
A
AWB
⁄ ⁄
A
AWB
⁄ ⁄
A
AWB
A
AWB
28/45
A
AWB
fig.1.1
A
AWB
⁄ ⁄
A
AWB
⁄ ⁄
A
AWB
A
AWB
A
AWB
28/45
fig.1.3
A
AWB
⁄ ⁄
A
AWB
⁄ ⁄
A
AWB
A
AWB
A
AWB
fig.1.2
3042 QS Guide(513441-00).qxd 2003:09:23 4:58 PM Page 4