Concord Camera Concord Eye-Q Eye-Q 3042AF - Manual (Page 7)

5
GETTING STARTED / TICKING PICTURES
SETTING THE FLASH
1. Press repeatedly until the desired indicator appears on the LCD.
TAKING A VIDEO CLIP
To record a video clip:
1. Slide the Mode Switch to ( ) Video Clip Mode.
2. Position the subject in the viewfinder or LCD.
3. Press the shutter button fully to capture a continuous video clip.
4. To stop recording, press the shutter button again.
Note: There is a time limit for each video clip. The time will vary depending on the amount of available
memory space. The alloted amount of recording time will appear on the top right hand corner of the
screen. The video clip capture will stop automatically when it reaches its time limit.
Video Clip Information
Resoluton: 512 x 384
Frame rate: 10fps
File Format: AVI (Motion Picture)
Note: The Flash Ready LED will turn red when the camera is storing the video clip. Do not open the
battery door or turn the camera off while recording, or the video clip may not be stored.
3 M
003/016 A
AWB
003/016
AWB
28 SEC 28 SEC 003/016 A
AWB
3 M
003/016
AWB
28 SEC 28 SEC
A
AWB
⁄ ⁄
A
AWB
⁄ ⁄
A
AWB
A
AWB
A
AWB
A
AWB
⁄ ⁄
A
AWB
⁄ ⁄
A
AWB
A
AWB
A
AWB
003/016 A
AWB
003/016
AWB
Press Shutter to Record
28 SEC 28 SEC
A
AWB
⁄ ⁄
A
AWB
⁄ ⁄
A
AWB
A
AWB
A
AWB
3042 QS Guide(513441-00).qxd 2003:09:23 4:58 PM Page 5