9 servicing and maintenance, Sm-90 lamellar grinding machine 27, Servicing and maintenance – Dick SM-90 230V User Manual
Page 59
SM-90 lamellar grinding machine
27
Servicing and Maintenance
9
9. Servicing and Maintenance
9.1
Cleaning the lamellar grinding machine
The lamellar grinding machine must be cleaned after each work
session.
1 Remove covers (Figure 6.2 – Structure and Function chap-
ter).
2 Remove residual abraded material from the machine,
e.g. using a brush.
3 Re-attach covers and screw tight.
9.2
Changing the lamellar grinding wheel
Change the lamellar grinding wheel as soon as the diameter has
become smaller than the guard.
Replace the lamellar grinding wheel as follows:
WARNING
Risk of injuries due to unauthorised or thoughtless swit-
ching on or wrong spare parts
• Always disconnect the mains plug before carrying out any
maintenance or repair work on the lamellar grinding machine.
• Only use original spare parts of Friedr. Dick GmbH & Co. KG.
WARNING
Risk of injuries due to improper repair work
• Any repair work on electric components may only be carried
out by qualified electricians.