Dick SM-90 230V - Manual (Page 61)

SM-90 lamellar grinding machine 29
Servicing and Maintenance
9
9.3 Changing the polishing wheel
The polishing wheel must be changed if it is worn to below the wor-
king area.
Replace the polishing wheel as follows:
1 Undo the fastening screws [1] of the cover [2].
2 Remove the cover [2].
3 Undo the fastening nuts [3] of the flange cover [4].
4 Remove the flange cover [4].
5 Replace the polishing wheel [5].
6 Install the individual parts in the reverse order.
Figure 9.2 – Polishing wheel
[1] Fastening screws for cover
[2] Cover
[3] Fastening nut
[4] Flange cover
[5] Polishing wheel
After finishing all repairs and servicing work, check that all
dismantled parts have been completely and correctly installed,
especially the covers.
1 2 3 4 5