Dick SM-90 230V - Manual (Page 60)

SM-90 lamellar grinding machine 28
Servicing and Maintenance
9
1 Undo the fastening screws [3] of the cover [2].
2 Remove the cover [2].
3 Unscrew the nut [4].
Important: Left-hand thread!
4 Remove the flange cover [5].
5 Position the new grinding wheel so that the direction of rota-
tion indicated on the wheel matches the direction of rotation
of the lamellar grinding machine.
6 Install the individual parts in the reverse order.
Figure 9.1 – Cover of the lamellar grinding machine
[1] Flap grinding disc
[2] Cover
[3] Fastening screws
[4] Lock nut M16 LH
[5] Flange cover
1
3
4 5
2