Liftgate ajar signal, Liftgate window, Securicode™ keyless entry keypad – FORD 2014 Expedition v.2 User Manual

Page 77: Programming a personal entry code, 76 locks

Advertising
background image

Note: If the power liftgate system is turned off in the message center,
the system cannot be activated with the outside release handle or rear
cargo area control button. The system will need to be turned on to
resume operation with the outside release handle or rear cargo area
control button. The power liftgate is still operational through the use of
the remote entry transmitter and instrument panel button when the
power liftgate is turned off in the message center.

Liftgate Ajar Signal

If the liftgate or liftgate glass are not fully latched, you will receive a
message on the instrument panel. If you see this message, check both
the liftgate glass and liftgate door to ensure they are fully latched.

Liftgate Window

To open the liftgate window, press
the button in the center of the
liftgate above the license plate.

SECURICODE™ KEYLESS ENTRY KEYPAD

You can use the keyless entry
keypad to lock or unlock the doors
or release the liftgate glass without
using a key.

The keypad can be operated with the factory-set 5-digit entry code; this
code is located on the owner’s wallet card in the glove box and is
available from your authorized dealer. You can also create up to five of
your own 5-digit personal entry codes.

Programming a Personal Entry Code

You can store up to three personal entry codes.

To create your own personal entry code:

1. Enter the factory-set code.

76

Locks

2014 Expedition (exd)
Owners Guide gf, 2nd Printing, November 2013
USA
(fus)

Advertising