Parking your vehicle, Hill start assist (if equipped), Hill start assist – FORD 2014 Focus v.1 User Manual

Page 170: Transmission 169

Advertising
background image

Parking Your Vehicle

WARNING: Do not park your vehicle in Neutral, it may move
unexpectedly and injure someone. Use 1 (First) gear and set the

parking brake fully.

To park your vehicle:

1. Apply the brake and shift into the neutral position.

2. Fully apply the parking brake, hold the clutch pedal down, then shift
into position 1.

3. Turn the ignition off.

HILL START ASSIST (IF EQUIPPED)

WARNING: The hill start assist feature does not replace the
parking brake. When you leave the vehicle, always apply the

parking brake and shift the transmission into P (Park) for automatic
transmission or 1st gear for manual transmissions.

WARNING: You must remain in the vehicle once you have
activated the hill start assist feature.

WARNING: During all times, you are responsible for controlling
the vehicle, supervising the hill start assist system and

intervening, if required.

WARNING: If the engine is revved excessively, or if a
malfunction is detected when the hill start assist feature is active,

the hill start assist feature will be deactivated.

This feature makes it easier to pull away when the vehicle is on a slope
without the need to use the parking brake. When this feature is active,
the vehicle will remain stationary on the slope for two to three seconds
after you release the brake pedal. This allows you time to move your
foot from the brake to the accelerator pedal. The brakes are released
automatically once the engine has developed sufficient drive to prevent

Transmission

169

2014 Focus (foc)
Owners Guide gf, 1st Printing, October 2012
USA
(fus)

Advertising