Programming a spare intelligent access key, Anti-theft alarm (if equipped), Arming the alarm – FORD 2014 Focus v.1 User Manual

Page 84: Disarming the alarm, Security 83

Advertising
background image

If the key has been successfully programmed it will start the engine
and operate the remote entry system (if the new key is an integrated
keyhead transmitter).

If it was not programmed successfully, wait 10 seconds and repeat
Steps 1 through 8. If you are still unsuccessful, bring your vehicle to
your authorized dealer.

Wait 20 seconds and then repeat this procedure from Step 1 to program
an additional key.

Programming a Spare Intelligent Access Key

See your authorized dealer to have additional keys programmed to your
vehicle.

ANTI-THEFT ALARM (IF EQUIPPED)

The system will warn you of an unauthorized entry to your vehicle.

The park and turn lamps flash and the horn sounds if unauthorized entry
is attempted while the alarm is armed. It triggers immediately if the
luggage compartment or the hood opens, and after a 12-second delay if
any door opens.

Take all remote controls to an authorized dealer if there is any potential
alarm problem with your vehicle.

Arming the Alarm

The alarm is ready to arm when there is not a key in the ignition. Lock
the vehicle to arm the alarm.

The message indicator flashes when theft protection is active.

Disarming the alarm

Disarm the alarm by any of the following actions:
• Unlock the doors or luggage compartment with the remote control.
• Turn the ignition on or start the vehicle.
• Use a key in the driver door to unlock your vehicle, then turn the

ignition on within 12 seconds.

Security

83

2014 Focus (foc)
Owners Guide gf, 1st Printing, October 2012
USA
(fus)

Advertising