Replacing the battery, Integrated keyhead transmitter, 60 keys and remote control – FORD 2014 Focus v.1 User Manual

Page 61

Advertising
background image

Type 2

To release the key blade, slide the
release on the back of the
transmitter, then pull the blade out.

Note: Your vehicle’s back-up keys
were issued with a security tag that
provides important vehicle key cut
information. Keep the tag in a safe
place for future reference.

Replacing the Battery

Note: Refer to local regulations when disposing of transmitter batteries.

Note: Do not wipe off any grease on the battery terminals or on the
back surface of the circuit board.

Note: Replacing the battery will not delete the transmitter from your
vehicle. The transmitter should operate normally.

The remote control uses one coin-type three-volt lithium battery CR2032
or equivalent.

Integrated Keyhead Transmitter

1. Twist a thin coin in the slot of the
transmitter near the key ring to
remove the battery cover.

2. Remove the old battery.

60

Keys and Remote Control

2014 Focus (foc)
Owners Guide gf, 1st Printing, October 2012
USA
(fus)

Advertising