Brakes – FORD 2013 C-MAX Hybrid v.1 User Manual

Page 161

Advertising
background image

WARNINGS

If the engine is revved excessively, or
if a malfunction is detected, the
system will be deactivated.

The system makes it easier to pull away
when your vehicle is on a slope without the
need to use the parking brake.

When the system is active, your vehicle will
remain stationary on the slope for two to
three seconds after you release the brake
pedal. This allows you time to move your
foot from the brake to the accelerator
pedal. The brakes are released
automatically once the engine has
developed sufficient drive to prevent your
vehicle from rolling down the slope. This
is an advantage when pulling away on a
slope, (for example from a car park ramp,
traffic lights or when reversing uphill into
a parking space).

The system will activate automatically on
any slope that will cause significant vehicle
rollback.

Using Hill Start Assist

1.

Press the brake pedal to bring your
vehicle to a complete standstill. Keep
the brake pedal pressed.

2. If the sensors detect that your vehicle

is on a slope, the system will activate
automatically.

3. When you remove your foot from the

brake pedal, your vehicle will remain
on the slope without rolling away for
approximately two or three seconds.
This hold time will automatically be
extended if you are in the process of
driving off.

4. Drive off in the normal manner. The

brakes will release automatically.

158

Brakes

Advertising
This manual is related to the following products: