FORD 2013 C-MAX Hybrid v.1 - Manual (Page 227)

E162539
3. Position the air cleaner assembly (A)
onto the engine and make sure the
assembly is aligned with the studs.
E162540
4. Install and tighten the bolts to each
side of the air cleaner assembly (A) as
shown with arrows.
E162541
5. Install and tighten the bolts to each
side of the air cleaner assembly (A) as
shown with arrows.
6. Connect the PCV tube (D) to the air
cleaner outlet tube ©).
7. Connect the air cleaner intake tube (E)
to the air cleaner assembly (A).
ADJUSTING THE HEADLAMPS
Vertical Aim Adjustment
The headlamps on your vehicle are
properly aimed at the assembly plant. If
your vehicle has been in an accident, the
alignment of your headlamps should be
checked by your authorized dealer.
E142592
8 feet (2.4 meters) A
Center height of lamp to ground B
25 feet (7.6 meters) C
Horizontal reference line D
1. Park the vehicle directly in front of a
wall or screen on a level surface,
approximately 25 feet (7.6 meters)
away.
Note: To see a clearer light pattern for
adjusting, you may want to block the light
from one headlamp while adjusting the
other.
2. Measure the height of the headlamp
bulb center from the ground and mark
an 8 foot (2.4 meter) horizontal
reference line on the vertical wall or
screen at this height.
224
Maintenance