FORD 2013 Flex v.4 - Manual (Page 64)

Intelligent Access Key (If Equipped)
Your vehicle may be equipped with
two intelligent access keys which
operate the power locks and the
remote start system. The key must
be in the vehicle to activate the
push button start system.
The key also contains a removable
mechanical key blade that you
can use to unlock the driver door.
Slide the release on the back of the
transmitter to release the key blade,
and then pull the blade out.
Note: Your vehicle’s back-up keys
came with a security tag that
provides important key cut
information. Keep the tag in a
safe place for future reference.
Replacing the Battery
Note: Refer to local regulations when disposing of transmitter batteries.
Note: Do not wipe off any grease on the battery terminals or on the
back surface of the circuit board.
Note: Replacing the battery will not delete the transmitter from the
vehicle. The transmitter should operate normally.
The remote control uses one coin-type three-volt lithium battery CR2032
or equivalent.
Keys and Remote Control 63
2013 Flex (471)
Owners Guide gf, 4th Printing, December 2012
USA (fus)