Memory feature (if equipped), Programming memory to the transmitter, Deactivating memory from the transmitter – FORD 2013 Flex v.4 User Manual

Page 66: 21 keys and remote control 65

Advertising
background image

5. Snap the battery cover back onto the transmitter and install the
backup key.

Memory feature (if equipped)

This feature allows you to recall the driver seat, power mirrors and
adjustable pedals (if equipped) memory positions.

Press the unlock button on the remote control or activate intelligent
access (if equipped) to recall memory. The seat and power mirrors
automatically move to the memory position. The mirrors will move to the
programmed position and the seat will move to the easy entry position.
The seat will move to the final position when the ignition is switched out
of off (if easy entry feature is enabled).

Programming memory to the transmitter

To activate this feature:

1. Move the memory features to the desired positions using the
associated controls.

2. Press and hold button 1 for
five seconds. A tone will sound
confirming memory position has
been set. Continue to hold until a
second tone is heard after five
seconds.

3. Within three seconds press the lock button on the remote control.

4. Wait 10 seconds, then press the unlock button on the remote control.

5. Repeat this procedure for memory button 2 and another transmitter if
desired.

Deactivating memory from the transmitter

To deactivate this feature:

1. Press and hold either the 1 or 2 button for five seconds. A tone will
sound when the memory store is done. Continue to hold until a second
tone is heard.

2. Within three seconds press the unlock button on the remote control.

3. Repeat this procedure for each additional transmitter if desired.

2

1

Keys and Remote Control

65

2013 Flex (471)
Owners Guide gf, 4th Printing, December 2012
USA
(fus)

Advertising