Changing the engine air filter, Adjusting the headlamps, Changing the engine air filter - 2.0l – FORD 2013 Fusion Hybrid v.1 User Manual

Page 262: Hybrid, Maintenance, Changing the engine air filter - 2.0l hybrid

Advertising
background image

Note: Make sure that the wiper blade locks
into place. Lower the wiper arm and blade
back to the windshield. The wiper arms will
automatically return to their normal position
when the ignition is turned on.

Replace wiper blades at least once per
year for optimum performance.

Poor wiper quality can be improved by
cleaning the wiper blades and the
windshield.

CHANGING THE ENGINE AIR
FILTER - 2.0L HYBRID

WARNING

To reduce the risk of vehicle damage
and/or personal burn injuries do not
start your engine with the air cleaner

removed and do not remove it while the
engine is running.

When changing the air filter element, use
only the air filter element listed. See
Capacities and Specifications (page
297).

Change the air filter element at the proper
interval. See Scheduled Maintenance
(page 430).

Note: Failure to use the correct air filter
element may result in severe engine
damage. The customer warranty may be
void for any damage to the engine if the
correct air filter element is not used.

E146048

1.

Loosen the 5 bolts on the air cleaner
cover.

2. Remove the air cleaner cover.
3. Remove the engine air filter element

from the engine air cleaner assembly.

4. Wipe any dirt or debris from the air filter

housing and cover to make sure no dirt
gets in the engine and to make sure you
have a good seal.

5. Install the new engine air filter element

to the engine air cleaner assembly.

6. Install the air cleaner cover.
7.

Tighten the 5 bolts to the air cleaner
cover.

ADJUSTING THE HEADLAMPS

Vertical Aim Adjustment

The headlamps on your vehicle are
properly aimed at the assembly plant. If
your vehicle has been in an accident, the
alignment of your headlamps should be
checked by your authorized dealer.

260

Maintenance

Advertising