Wipers and washers, Windshield wipers, Autowipers – FORD 2013 Fusion Hybrid v.1 User Manual

Page 67

Advertising
background image

WINDSHIELD WIPERS

Note: Fully defrost the windshield before
switching on the windshield wipers.

Note: Make sure the windshield wipers are
switched off before entering a car wash.

Note: Clean the windshield and wiper
blades if they begin to leave streaks or
smears. If that doesn't resolve the issue,
install new wiper blades.

Note: Do not operate the wipers on a dry
windshield. This may scratch the glass,
damage the wiper blades or cause the wiper
motor to burn out. Always use the
windshield washers before wiping a dry
windshield.

E144495

Single wipe

A

Intermittent wipe

B

Normal wipe

C

High speed wipe

D

Intermittent Wipe

E144496

Shortest wipe interval

A

Intermittent wipe

B

Longest wipe interval

C

Use the rotary control to adjust the
intermittent wipe interval.

Speed Dependent Wipers

When your vehicle speed increases, the
interval between wipes will decrease.

AUTOWIPERS

(IF EQUIPPED)

Note: Fully defrost the windshield before
switching on the windshield wipers.

Note: Make sure the windshield wipers are
switched off before entering a car wash.

Note: Clean the windshield and wiper
blades if they begin to leave streaks or
smears. If that doesn't resolve the issue,
install new wiper blades.

Note: If you switch autolamps on in
conjunction with autowipers, your low beam
headlamps will illuminate automatically
when the rain sensor activates the
windshield wipers continuously.

Note: Wet road conditions can cause
unexpected wiping or smearing.

65

Wipers and Washers

Advertising