FORD 2013 Mustang v.1 - Manual (Page 100)

HALO COLOR: You can select one of the preset colors for halo lighting
or create up to three custom colors using the MyColor
௡ feature.
Note: Headlamps or parking lamps must be on to set up colors.
To choose colors for the gauges, halo color or ambient lighting do the
following:
1. Press SETUP to reach the GAUGE COLOR, AMBIENT COLOR, or
HALO COLOR menu.
2. Press RESET to scroll through the following color options:
• ICE BLUE • BLUE
• WHITE • ORANGE
• GREEN • RED
• PURPLE • MYCOLOR 1, 2, 3 (See HOLD
RESET TO SET MY COLOR 1, 2,
3 following, to save personalized
color combinations)
HOLD RESET TO SET MYCOLOR 1, 2, 3 (Saving your own colors)
Apart from the preset colors, you can create your own color by adjusting
the levels of the three primary colors (red, green, and blue) through the
MyColor
௡ feature to achieve any of 125 different combinations. You can
save up to three custom colors in MyColor
௡.
To enter the MyColor
௡ adjust mode, do the following (vehicle must be
stationary):
1. Press and hold RESET for three seconds at the MyColor 1, 2 or 3
menu option to reach the MyColor
௡ adjust mode.
2. Press SETUP to scroll through the R (red), G (green), B (blue) and
Exit options.
3. Press RESET to blend in more of the color being adjusted.
4. To save and exit, hold RESET for three seconds when prompted.
Pressing RESET for less than three seconds will cycle back through the
colors.
UNITS
Displays the current units English or Metric.
Press RESET to change from English to Metric.
100 Information Displays
2013 05+ Mustang (197)
Owners Guide gf, 1st Printing
USA (fus)