Checking the wiper blades, Changing the wiper blades, 240 maintenance – FORD 2013 Mustang v.1 User Manual

Page 240

Advertising
background image

If the battery has been disconnected or a new battery has been installed,
the clock and the preset radio stations must be reset once the battery is
reconnected.

Always dispose of automotive batteries in a responsible manner. Follow
your local authorized standards for disposal. Call your local authorized
recycling center to find out more about recycling automotive batteries.

CHECKING THE WIPER BLADES

Run the tip of your fingers over the edge of the blade
to check for roughness.

Clean the wiper blades with washer fluid or water
applied with a soft sponge or cloth.

CHANGING THE WIPER BLADES

1. Pull the wiper blade and arm away
from the glass.

2. Squeeze the locking tabs to release
the blade from the arm and pull the
blade away from the arm to remove it.

3. Attach the new blade to the arm
and snap it into place.

Replace wiper blades at least once per
year for optimum performance.

Poor wiper quality can be improved by
cleaning the wiper blades and the
windshield.

To prolong the life of the wiper blades, it is highly recommended to
scrape off the ice on the windshield before turning on the wipers. The
layer of ice has many sharp edges and can damage the micro edge of the
wiper rubber element.

240

Maintenance

2013 05+ Mustang (197)
Owners Guide gf, 1st Printing
USA
(fus)

Advertising