FORD 2013 Mustang v.1 - Manual (Page 335)

System Settings
System Settings provide access to your Bluetooth Devices and
Advanced menu features.
The Bluetooth Devices menu allows you to add, connect, delete and set a
phone as “primary” as well as turn your Bluetooth feature on and off.
The Advanced menu allows you to access and set prompts, languages,
defaults, perform a master reset, install an application and view system
information.
Bluetooth Devices Menu Options
This menu allows you to add, connect, delete, set a phone as primary,
and turn Bluetooth on or off.
1. Press the phone button to enter the Phone Menu.
2. Scroll until System Settings appears and press OK.
3. Scroll until Bluetooth Devices appears and select OK.
4. Scroll to select from the following options:
If you select: You can:
Add Bluetooth
Device
*
Pair additional phones to the system.
1. Press OK to select, then again when Find
SYNC appears in the display.
2. Follow the directions in your phone’s user guide to
put your phone into discovery mode. A six-digit PIN
appears in the display.
3. When prompted on your phone’s display, enter the
six-digit PIN provided by SYNC.
4. When Set As Primary Phone? appears, press OK.
Scroll to toggle between Yes and No, then press OK.
5. Depending on the functionality of your phone, you
may be asked additional questions (i.e. if you would
like to download your phonebook). Scroll and use OK
to select your responses.
Connect
Bluetooth Device Connect a previously paired Bluetooth-enabled phone.
1. Press OK to select and view a list of previously
paired phones.
2. Scroll until the desired device is chosen, then press
OK to connect the phone.
Note: Only one device can be connected at a time.
When another phone is connected, the previous one is
disconnected.
SYNC
ா
335
2013 05+ Mustang (197)
Owners Guide gf, 1st Printing
USA (fus)