280 wheels and tires – FORD 2013 Mustang v.1 User Manual

Page 280

Advertising
background image

WARNING: To lessen the risk of personal injury, do not put any
part of your body under the vehicle while changing a tire. Do not

start the engine when your vehicle is on the jack. The jack is only
meant for changing the tire.

Note: Passengers should not remain in the vehicle when the vehicle is
being jacked.

1. Park on a level surface, set the parking brake and activate the hazard
flashers.

2. Place the gearshift lever in P (Park) and turn the engine off.

3. Block both the front and rear of
the wheel diagonally opposite the flat
tire. For example, if the left front tire
is flat, block the right rear wheel.

4. Remove the lug wrench, spare
tire and jack.

5. Remove the center ornament (if
equipped) from the wheel. Loosen
each wheel lug nut one-half turn
counterclockwise but do not remove
them until the wheel is raised off
the ground.

280

Wheels and Tires

2013 05+ Mustang (197)
Owners Guide gf, 1st Printing
USA
(fus)

Advertising