Locks and security – FORD 2012 Explorer v.1 User Manual
Page 132
Condition
Potential Causes
Cannot clear MyKey
• Key in the ignition is a MyKey .
• No MyKeys are programmed to the
vehicle. Refer to Create a MyKey
section.
• Vehicle has been started using a
non Ford-approved remote start
system that is programmed as
MyKey
. Refer to Using MyKey with
remote start systems section.
Lost the only admin key
• Purchase a new key from your
authorized dealer.
Lost any key
• For programming spare keys, refer
to the Programming spare keys
section in this chapter.
I accidentally programmed all
keys as MyKeys
• Vehicle has a non Ford-approved
remote start system that is recognized
as an admin key. Refer to the Using
MyKey
with remote start systems
section to reset all MyKeys
as admin
keys.
No MyKey
function
• An admin intelligent access key is
present at a push-and-start vehicle.
• No MyKeys are programmed to the
vehicle. Refer to Create a MyKey
section.
• Vehicle has been started using a
non Ford-approved remote start
system (as an admin key) then a
MyKey
is inserted without restarting
the engine.
Locks and Security
132
2012 Explorer (exp)
Owners Guide, 1st Printing
USA (fus)