Replacing hid headlamp bulbs (if equipped), Replacing front parking lamp/turn signal bulbs, Lights – FORD 2012 Explorer v.1 User Manual
Page 81
Advertising
Replacing HID headlamp bulbs (if equipped)
The headlamps on your vehicle use a “high intensity discharge” source.
These lamps operate at a high voltage. When the bulb is burned out, the
bulb and starter capsule assembly must be replaced by your authorized
dealer.
Replacing front parking lamp/turn signal bulbs
1. Make sure that the headlamp
control is in the off position.
2. Open the hood.
3. Remove the hood overslam
bumper tower to service park/turn
bulb (if needed).
4. Rotate the bulb socket
counterclockwise and remove it
from the lamp assembly.
Lights
81
2012 Explorer (exp)
Owners Guide, 1st Printing
USA (fus)
Advertising